Chất tẩy rửa

Specification: Main unit
Processable material: Plastic (Metals are not included.) such as chemical wood and modeling wax
Operating range: 400 x 305 x 135mm
Mountable work size: 400 x 305 x 100mm
Shaft drive system: stepping motor
Operating speed: XY/7 to 3600mm/min, Z/7 to 3000mm/min
Software resolution: RML-1/0.001 mm/Step, NC Code/0.001 mm/Step
Mechanical resolution: Half Step/0.01 mm/Step
spindle motors: brushless DC motor
Spindle rotation speed: 4500 to 15000rpm
Tool capacity: 6 pieces (1 piece detected pin in common use)
Mountable tool: Shank diameter/φ6mm, Blade-tip Diameter/φ6mm or less, Length/30 to 90mm
Interface: USB
Control Commands: RML -1, NC Code
power supply condition : AC100V ±10% 50/60Hz (Overvoltage category: Category II, IEC 60664 -1)
Power consumption: about 95W
Operating sound: Operating/60dB (A) or less (uncut), Standby/45dB (A) or less
Outer dimensions: 760 x 900 x 732mm
Weight: 122kg
Accessories: power cord, power supply Plug Adapter, USB Cable, Manual, Software CD-ROM, Detected pin, Hex Driver, Hex Wrench, Spanner, Tool Holder, Tool Positioning jig, Z0 Sensor, etc.
*Control PC and 3DCAD are not included.