Tủ hút ẩm kỹ thuật số

External dimensions (mm): 524 x 1067 x 574
Inner dimensions (mm): 483 x 853 x 560
Dehumidification system: H2O electrolysis discharge by solid polymer electrolytic dehumidification element (Rosar (R))
Dehumidified ability (When 30% rh is set): Within 8 hours
** No internal load, outdoor environment 25 ℃ 60 This is a reference from when the %RH air was released (Vary depending on outdoor air conditions).
Humidity Range: 10 to 60% RH
Humidity control range: 25 to %RH indoor temperature
** No internal load, outdoor environment 25 ℃ 60 %RH time reference value (Vary depending on outdoor air conditions)
to : 0 to 60 ℃/10 measurement range 60 %RH
Temperature and humidity sensors: Temperature/thermistor elements, humidity/resistance type low humidity measurement sensors
Area of dehumidifying element: about 49 cm2
Humidity control system: microcomputer type ON/OFF control
Temperature and humidity display accuracy: ± 1 ℃ (25 ℃ to 40 ℃)/± 5 %RH (15 to 40% RHat 25 ℃)
** If the humidity is less than 10%, the humidity display is “LL”. If the humidity level exceeds 60 %RH, “HH” is displayed.
Show resolution: 1 ℃/1 %RH
Sampling interval: 0.5 sec
Material: Main unit/PMMA (acrylic) Frame/Aluminum/Control Unit/Steel Plate
Shelf board mm : 460 mm x 490 Dimensions
Shelf Mounted pitch (interval shelf board minimum): 50 mm (35 mm)
Shelf board specifications : Reinforced plastic (impact resistant polystyrene)
Shelf board Load tolerance: about 10 kg/sheet
Safety device: individual operation error indication function (During short circuit or disconnection)/overcurrent fuse of solid polymer electrolytic dehumidification element
Power supply: AC100V 50/60 Hz
Power consumption: about 34 W
power cord length : about 2 meters (3P plug and main unit are grounded)
Casters: Elastic feet
Weight: about 25 kg
Accessories: Reinforced plastic shelf board x 4 pieces