Tủ ủ mẫu lạnh 130L
- Mã sản phẩm: 1-423-02-22
- Quy cách (Đóng gói): 1 unit
- Giá nhà sản xuất: 71,655,000 ¥
Đặc tính và thông số kỹ thuật
Capacity (L): 130
Inner dimensions (mm): 620 x 340 x 584
Outer dimensions (mm): 700 x 502 (569) x 1107
Material: Exterior/Plastic baked paint steel sheet, Interior/Stainless steel sheet
Temperature settings range: 15 to + 50 °C
Compressor output: 175W
Refrigerant: R -134 a
Temperature accuracy: +/1.5 °C (Setting: 5.0 °C, no load) when the refrigerator is ON/OFF controlled, +/0.5 °C (Setting: 37.0 °C, no load) when the heater is proportional controlled.
Temperature distribution: ±0.5 °C (Set temperature: 37.0 °C, ambient temperature: 20 °C, no load)
Circulation method: Lower back (Callout) ⇒ Upper back (suction)
Frost removal method: Heater defrost method (microcomputer control)
Function: 8 steps, 2 patterns
Alarm function: door alarm, temperature abnormality, sensor abnormality, over rise prevention, earth leakage breaker
Operation mode: –
Power supply: AC100V/50/60Hz/15 A
Power cord length: 3 m
Power supply plug : 3P plug with ground (L)
Maximum Power Consumption (50/60Hz): 430/440
Weight: about 70kg
Number of shelf board: 2 pieces
Internal lighting: fluorescent lamps 15W
Leg part: Free caster, adjustable feet included
Measurement hole: φ40mm, silicone rubber plug
Accessories: Inspection and inspection documents
*Products with inspection certificate is a service to issue inspection certificate after inspection by control and electric engineer at the time of shipment.
*IQ/OQ service is available for a fee.