Ống nhựa NB0860-100-W Pisco
- Thương hiệu: Pisco
- Mã sản phẩm: 61-1955-73
- Quy cách (Đóng gói): 1 roll
- Giá nhà sản xuất: 3,200,000 ¥
Đặc tính và thông số kỹ thuật
Color: Milk White
Outer diameter (mm): 8
Inner diameter (mm): 6
Minimum bending radius (mm): 22
Total length (m): 100
Maximum operating pressure (MPa): 1.3
Operating temperature range (°C): For air: -20 to 100 (no freezing) / For water and heat transfer oil: -15 to 90 (no freezing)
Fluids used: Air, water (under certain conditions), heat transfer oil (under certain conditions)
Operating vacuum pressure (MPa): -0.1
Wall thickness (mm): 1
Tube outer diameter (φD) (mm): φ8
Tube inner diameter (φD) (mm): φ6
Minimum mounting radius (mm): 40
Maximum operating pressure: 1.3 MPa (at 20°C and 65% RH)
Operating vacuum pressure: -100kPa
Operating temperature range: -15 to 90°C (no freezing)
Manufactured in an ISO9001 certified factory.
Manufactured in an ISO14001 certified factory.
Material/Finish: Nylon (PA12)
Avoid applying stress to the tube, such as tension, twisting, or extreme bending. This may cause the tube to collapse, burst, or detach.
Avoid rubbing or tangling the tube to prevent damage, as this could cause the tube to burst.
The burst pressure of the tube decreases with increasing temperature, so be sure to understand the operating pressure and allow for a sufficient safety margin.
Please use the tube at a bending radius greater than or equal to the minimum bending radius.
When laying the tubing, please allow for sufficient slack to account for changes in length, etc.
Country of origin: Japan
Code number: 378-1496
